YardEdge Pro™ Cordless Angle Die Grinder — 33-Piece Kit
YardEdge Pro™ Cordless Angle Die Grinder — 33-Piece Kit
Delivery — pick your speed at checkout
- Free Shipping15–19 days$0
- Priority9–13 days$3.99
- Express4–6 days$6.99
Dispatched within 24 hours on working days. Free shipping to the US and Canada with no minimum, and 30 days to send it back — no restocking fee.
Couldn't load pickup availability
A die grinder is the tool that makes the difference between a repair that works and a repair that looks like you meant it.
The weld you ground flat with an angle grinder and gouged. The rust in the corner of the wheel arch you can't reach. The burr on a cut edge that catches your hand every time. The bolt hole that needs opening two millimeters (about 0.08 in). The paint you want off a bracket without taking the bracket with it. A 4-1/2" grinder is a hammer for all of those — too big, too fast, too clumsy.
The YardEdge Pro™ Angle Die Grinder is the small, precise one. Brushless, cordless, and it arrives with 33 pieces — flap discs, surface conditioning discs, sanding discs, a polishing pad, backing pads, an extension shaft, wrench, two batteries, charger and a case. You can use it the day it lands, on almost anything.
No compressor, no air hose, no noise
Die grinders have always been air tools, and that's why most people don't own one. To use a pneumatic grinder you need a compressor big enough to keep up with it, a hose across the floor, and a tolerance for the racket a compressor makes cycling on and off all afternoon. That's a thousand-dollar setup to deburr a bracket. This one runs off a battery. It goes in the car, under the car, up a ladder, out to the gate — anywhere at all, with nothing trailing behind it.
Rust, in the places rust lives
Wheel arches, sills, seat rails, gate hinges, trailer frames. The surface conditioning discs strip corrosion back to bright metal without cutting into the panel underneath.
Welds and burrs
Dress a weld down flush instead of dishing it. Take the razor edge off anything you've cut with the band saw or the grinder, so the next person to pick it up doesn't bleed.
Polishing and finishing
Work through the grits — 36 through 240 in the box — then finish on the polishing pad. Aluminum, stainless and chrome come up properly rather than just clean.
The extension shaft
Reaches into recesses, exhaust ports and box sections the tool body will never fit into. It's the accessory that turns "I can't get in there" into a five-minute job.
Brushless, and why it matters here especially
Grinding is constant load — the motor never gets a rest the way a drill does between holes. Carbon brushes are what fail first under that, which is why cheap grinders are the tools that die in everyone's garage. There are none here: less heat, less wasted charge, and it holds its speed when you lean into a weld instead of bogging down.
What's in the case
- Brushless cordless angle die grinder
- Two 21V 2.0Ah lithium batteries and charger
- Flap discs for grinding and blending
- Surface conditioning discs in several grades — rust, paint and scale
- Sanding discs from 36 through 240 grit
- Polishing pad and backing pads
- Extension shaft for tight access
- Wrench and hard carry case
Straight talk about what this is
This is a finishing and detail tool. Deburring, rust removal, weld dressing, porting, polishing, opening holes, cleaning up edges — small, controlled work on metal.
It is not a cut-off tool. If you need to cut through rebar, box section or a seized bolt, reach for the 4-1/2" angle grinder or the band saw. Ask a die grinder to do a cutting job and you'll burn through discs and wear the tool out for no reason.
Questions people ask first
I already own an angle grinder. Do I need this?
They do different jobs. An angle grinder removes material fast and roughly. A die grinder removes it precisely, where you point it, without wrecking what's next to it. If you've ever gouged a panel trying to clean up a weld, that's the gap this fills.
Two 2.0Ah batteries — is that enough?
For detail work, yes. You're grinding for a minute here and thirty seconds there, not running continuously. Two packs means one is always charged, and they're the same 21V packs used across the rest of the range.
Can I buy more discs when these run out?
Yes — they're standard 2" roll-lock and quick-change discs, available in any auto parts store or hardware store. Nothing here is proprietary.
What if it isn't right?
Thirty days, money back, no restocking fee. It ships from inside the United States so it arrives quickly and goes back easily.
The detail tool nobody owns, and everybody needs.
Brushless, two batteries, 33 pieces, no compressor. Free US shipping and thirty days to change your mind.
